As the use time of the air compressor increases, there will be more and more reasons for the failure of the air compressor. Today Wuxi Youteng Machinery has compiled some content about common failures and causes of air compressor control panels.

⦁ Common fault of air compressor control panel 1: Incorrect exhaust pressure or temperature value.

Cause Analysis: 

① System calibration parameters are abnormal;

②DA chip failure.

⦁ Common fault 2 of the air compressor control panel: the solenoid valve is not loaded.

Cause Analysis: 

①The controller has no output;

②Basic parameter settings are incorrect;

③Burn out.

⦁ Common faults of air compressor control panel 3: No response when pressing the start button.

Cause Analysis: 

①The button is damaged;

②System abnormality;

③Display panel failure, etc.

⦁ Common fault of air compressor control panel 4: LED does not light up after starting.

Cause Analysis: 

①All-in-one machine failure;

② LED panel failure;

③Wiring problems, etc.

⦁ Common faults of the air compressor control panel 5: The display does not respond when turned on.

Cause Analysis: 

①The power is not connected;

②Display failure;

③Data upload communication failure.

⦁ Common faults of air compressor control panel 6: The display indicator light flashes, but the screen does not respond.

Cause Analysis: 

① System power failure;

② Transformer failure, etc.

⦁ Common faults of air compressor control panel 7: Failed to start.

Cause Analysis:

① System CPU failure;

② System program failure;

③ Mainboard internal circuit failure;

④ Abnormal voltage, etc.

⦁ Common faults of air compressor control panel 8: The display has backlight but no display.

Cause Analysis: 

① Poor line contact;

②Display aging, etc.

The above is the relevant content collected by Wuxi Youteng Machinery about common faults of air compressor control panels and analysis of their causes.

If you have any questions about the air compressor, please contact us.

Phone: 0086-18055324865

Email: [email protected]

Atlas Copco Oil-Free Screw Air Compressor For Sale - Youteng Machinery

Wuxi Youteng Machinery Co., Ltd. was established in 2012, mainly engaged in air compression system, vacuum system design consulting, engineering project and repairing services etc. Our company mainly provides air compressor equipments and  for compressors of world-famous brands. We also support OEM. In addition, The company has a number of experienced technicians to perform maintenance work on various air compressors, dryers and filters, which have a certain influence in China. At the same time, the company also participates in motor overhaul projects and maintains various motors. We have a complete service system and sufficient compressor spares to relieve customers from worries. If you are interested in atlas copco air compressor control panels , please contact us.