Since the chamber filter press is a general-purpose device, it is used in a variety of industries. It is precisely because the chamber filter press is frequently used that there are often some emergencies, and we are inadvertently guarded against. We sometimes face the event of heavy rain, and also encounter the situation of a sudden power outage. How should we deal with these? Today, I will introduce the sudden power failure of the chamber filter press, what should I do?

During the filtration process of the chamber filter press, the filtrate is continuously input into the equipment. There is a large amount of filtrate in the pipelines and paths of the equipment. At the same time, there are some filter cakes in the filter chamber, and the hydraulic system is in normal working condition. Under the pressure, extremely strong pressure is applied to the filter plate. When this state is suddenly changed due to no power supply, it is a very important problem for the chamber filter press and needs to be handled correctly.

Due to the sudden power failure, in addition to the pressure system and the control system of the chamber filter press stopping working, the feed pump is not feeding the filtrate, but there is a large amount of filtrate in the pipeline and equipment path, and the hydraulic system still maintains a high-pressure state, and it is not very good to quickly reduce the pressure, all these problems need to be dealt with immediately.

First, clear the filtrate from the equipment. From the feed pump to the chamber filter press drain, all the parts in the middle that may contain filtrate need to be disassembled and cleaned to prevent the filtrate from drying and hardening in the equipment, blocking all key parts of the equipment, to prevent these problems from expanding and causing damage to the equipment when the chamber filter press is started again. It is worth mentioning that the cleaning of the filter chamber needs to first remove the pressure of the pressure system, control the operating lever of the hydraulic system to make it in the backward position, and use other methods to return the push plate of the chamber filter press, and then a piece can be removed. When one filter plate is loosened, the entire filter plate and filter cloth will be washed with clean water. After cleaning, pay attention to drying it as soon as possible.

The above is about the causes and emergency methods of sudden power outages in the chamber filter press, I hope to be helpful to everyone. As a wholesaler of chamber filter presses, Kintep specializes in the production of chamber filter presses. If you want to know more about chamber filter press, then come and pay attention to our website.