beer stainless steel tank is a fermenter used to ferment wine. Wine contains a variety of amino acids, minerals, vitamins and other nutrients needed by the human body, with anti-aging, protect blood vessels, prevent arteriosclerosis, reduce cholesterol and other effects, widely loved. Therefore, it is important to control the quality of the wine through beer stainless steel tank. beer stainless steel tank ensures the conditions for the fermentation of wine, so the fermented wine tastes delicious and fermentation is complete. An important control factor of beer stainless steel tank is the control of fermentation temperature. Fermentation temperature is controlled by jacket setting and insulation.

beer stainless steel tank mainly includes tank body, can, tank bottom, cooling jacket and level gauge, sampling valve, manhole, feed port, liquor and liquor outlet, slag discharge device, fermenter required liquid, etc. The inner circulation system and so on. beer stainless steel tank inner wall polishing RA0.4-0.6μm, outer wall SUS304 stainless steel, wall thickness 2mm, outer plate 2B original surface polishing. The tank wall and tank bottom 50-100mm polyurethane foam insulation layer, internal replacement of hot jacket (mirror plate), mirror plate thickness of 1.5mm, temperature control 5-35℃; 2 CIP shampoo, liquid level, temperature online electronic display.

The composition of beer stainless steel tank is as follows:

beer stainless steel tank tank is mainly used for the culture and fermentation of various bacteria, with strong sealing (to prevent bacterial contamination) and mixing slurry in the tank. Used in the fermentation process. Stir constantly. At the bottom is a ventilated sprayer that delivers the air, or oxygen, the bacteria need to grow. There's a control sensor on the top plate. Common pH and DO electrodes are used to monitor the fermentation process. Changes in pH and DO in fermented broths. The controller is used to display and control fermentation conditions.

beer stainless steel tank equipment maintenance methods are as follows:

1. If the inlet pipe and outlet pipe joints are leaking and tightening the joints fails to solve the problem, it may be necessary to add or replace the filler.

2, should regularly check the pressure gauge and safety valve, if there is a fault should be replaced or repaired in time.

3. When cleaning beer stainless steel tank, do not rub with a soft brush or scrape with a hard tool to avoid damaging the surface of beer stainless steel tank.

4. The supporting equipment should be calibrated once a year to ensure normal use.

beer stainless steel tank https://www.hzzjde.com/Stainless_steel_tanks/